TigerStop TigerSaw Miter, Owner'S Manual

Page: 48 / 52

42
Lubrication
Swivel Table Lubrication
A timed grease dispenser provides lubrication for the swivel table. This
dispenser (right) is located on the front right corner of the saw cabinet.
When the reservoir is nearly empty, refill it.
• Use a nozzle or coupler designed for standard grease fittings.
• Use any NLGI grade 0 grease.
Insufficient lubrication will result in rough and noisy swivel table motion.
Dispenser timing is set in the factory, but is adjustable with switches (below)
located on a circuit board behind the round brown plastic cap (right).
• The left-hand set of four switches controls the idle time.
• The right-hand set of four switches controls the run time.
Maintenance
Idle
Time
(hours)
Switch
Position
1 2 3 4
1 ↑ ↓ ↓ ↓
2
↓ ↑ ↓ ↓
3 ↑ ↑ ↓ ↓
4
↓ ↓ ↑ ↓
5
↑ ↓ ↑ ↓
6
↓ ↑ ↑ ↓
7
↑ ↑ ↑ ↓
8
↓ ↓ ↓ ↑
9
↑ ↓ ↓ ↑
10
↓ ↑ ↓ ↑
11
↑ ↑ ↓ ↑
12
↓ ↓ ↑ ↑
13
↑ ↓ ↑ ↑
14 ↓ ↑ ↑ ↑
15
↑ ↑ ↑ ↑
Run Time
(seconds)
Switch
Position
1 2 3 4
8 ↑ ↓ ↓ ↓
16
↓ ↑ ↓ ↓
24 ↑ ↑ ↓ ↓
32
↓ ↓ ↑ ↓
40
↑ ↓ ↑ ↓
48
↓ ↑ ↑ ↓
56
↑ ↑ ↑ ↓
64
↓ ↓ ↓ ↑
72
↑ ↓ ↓ ↑
81
↓ ↑ ↓ ↑
89
↑ ↑ ↓ ↑
97
↓ ↓ ↑ ↑
105
↑ ↓ ↑ ↑
113 ↓ ↑ ↑ ↑
121
↑ ↑ ↑ ↑