21
Move Screen
The Move screen allows manual control of all connected equipment.
The Move screen can always be accessed by touching “Move” at the top of the screen.
Display:
• The miter angle and pusher position are both displayed at the lower left of the Move Screen.
• The position of the currently controlled motion axis (positioner or miter) is displayed in real time in the
upper right of the keypad.
• The currently controlled motion axis is specified on the gray button beneath the keypad.
• The left half of the screen contains programmable hot keys.
Control:
• Press the gray [Positioner] button to toggle control between mitering and positioning.
-
The gray button will be labeled [Miter] if the controls are currently focused on mitering motion.
• Enter a target position with the keypad and tap the orange [Start] button to initiate movement.
• Touch the red [Stop] button to interrupt current movements in either axis.
• Tap radio buttons beneath the hot keys to switch between the fraction hot keys and sixty additional
programmable hot keys.
• Press and hold a hot key until the pointer icon changes to edit its function and appearance.
TigerTouch
Summary of Contents for TigerSaw Miter
