12
1. From the Ready Screen (
), press the [Show] soft key to
display expanded options.
2. Press the [PrSet] soft key to access the PreSet menu.
3. Enter the number of the desired PreSet and press
.
4. TigerStop will move to the PreSet position.
•
Presets can instead be set to move from the current position by the
programmed amount (
PreSet
PreSets are a set of 100 programmable hot keys.
Programming PreSets
1. From the PreSet menu, enter the preset number and press the [Edit]
soft key.
Example: Press
followed by the [Edit] soft key.
2. Enter the desired length and press
to program the preset.
Example: Press
. 15.313 inches is 389 mm.
3. Press
STOP
to go back to the Ready Screen, or use
and
to
program additional PreSets.
Deleting PreSets
1. From the PreSet menu, enter the PreSet number you wish to delete and
press the [Clear] soft key.
2. Press
to clear the preset.
3. The screen displays the next preset.
4. Press
STOP
to return to the Ready Screen.
Basic TigerStop Operation
Summary of Contents for TigerSaw Miter
