TigerStop TigerSaw 1000, Installation Manual

Page: 40 / 68

37
1.Start at the Ready Screen. Press the [Show] soft key to display
more options.
2.A new set of soft key options have appeared. Press the [Incr]
soft key to access the increment feature.
3.Enter the size you want to increment and press [=].
For this example, I am going to use an increment size of 2 in.
4.The current position is 42. If that is where you want to start, press
[Start] to begin incrementing. If you need to move TigerStop, enter the
position and press [Start]. TigerStop will move to position. Then press
[Start] to begin incrementing.
5.When you are finished, press [Stop] to return to the Ready Screen.
Preset
The Preset function is a set of 100 programmable hot keys used to quickly access common lengths.
Presets...
•Can be used in Set point, Pusher or Increment mode.
•Can be programed in Preset slots number 1 - 100.
Note: Preset functionality can be changed using the ‘Preset’ setting in the part list menu.
Preset Programing
1.Start at the Ready Screen. Press the [Show] soft key to display
more options.
2.A new set of soft key options have appeared. Press the [PrSet]
soft key to access the preset feature.
3.Enter the number of the preset you want to program and then press
the [Edit] soft key.
For this example, I am going to program preset number 1.