Tiger TRIPLE FLAIL JD5 M T4F Series, Mounting And Operating Instructions

Page: 37 / 240

ASSEMBLY
Assembly Section 2-7
SWITCHBOX MOUNT BRACKET
Place the cable control bracket on the floor so that the bracket is 4-3/8” from the front window.
Also the outer rear corner (heel) of the bracket is 5” from the edge of the door. The middle corner
of the bracket should be 1-1/8” from the edge of the door. See image below. Be sure that the
location of the stand will allow the operation of all control levers in the tractor and that the door
will not strike the stand when shut. Double check under the cab for cables and wires that may be
cut when drilling. And before drilling double check location of the stand for proper placement of
holes. Drill 3 holes through the floor to match control bracket. Then use a hole saw to create 3
larger holes in the floor mat to fit the spacers. Secure the bracket with capscrews and nylock nuts
noted in Parts Section..
(ASM JD 0239 JD5M SWITCHBOX)