Tiger JPX-W10W, Operating Instructions Manual, Page: 7 / 76

12 13
ENGLISH
Voice prompts guide you in operation.
● To cancel the audio guide
Touch the [Cancel] key.
Touch and hold the
[AudioGuide] key
approximately 1 second.
The audio guide setting screen is displayed.
In the initial setting, the audio type is buzzer and
the volume is medium.
1
Touch the [Hour • Min] key
several times to select the item.
● To select the audio type
Touch the [Hour] side several times.
● To select the volume
Touch the [Min] side several times.
Touch
(clock icon)
.
The [Hour • Min] key appears and the clock display
flashes.
On
To cancel the clock setting
Touch the [Cancel] key.
Touch the [Start/Rinse-free]
key.
The setting is completed.
3
2
4
Display Audio Audio type
0 No Buzzer
1 Yes
Buzzer (initial
setting)
2 Yes Melody 1
3 Yes Melody 2
• You can also select by touching the number
on the display.
Display Volume
1 Low
2 Medium (initial setting)
3 High
• You can also select by touching the number
on the display.
To hear the audio guide again
Touch the [AudioGuide] key again.
After ending the audio guide setting, you can hear the
same content by touching the [AudioGuide] key unless
you perform the next operation.
Connect the power plug to the
outlet.
Touch the [Start/Rinse-free]
key.
The [Hour • Min] key goes off.
The time setting is completed.
1
4
Lithium battery
● The life of the lithium battery is 4 or 5 years if the power
plug is not connected.
● "0:00" flashes in the clock display when the lithium
battery has been exhausted.
Although you can cook normally, the stored clock
setting, timer setting and elapsed keep-warm time are
not recovered. Set the clock again.
● Do not attempt to replace the lithium battery by yourself.
A new lithium battery can be replaced with charge. Ask
the place of purchase.
Note
You cannot set the clock during the following operations :
C ooking, K eeping warm, Timer cooking and T imer soaking.
The clock is 24-hour clock time. The rice cooker has a built-in lithium battery that stores the clock setting, timer
setting and elapsed keep-warm time even with the power plug disconnected.
Before Use
Blinking
Blinking
Blinking
Blinking
Touch the [Hour
•
Min] key
several times to set the clock to
the right time.
Example : When changing from 9:35 to 10:36.
Touch [Hour] several times to set it to "10".
Touch [Min] several times to set it to "36".
Touch and hold to fast-forward.
● You can also set the clock by touching the
number of the clock display. Touch and hold to
fast-forward.
3
Using the audio guide Setting the clock
Touch the [Back • Next] key
several times to select the
language.
2
Display Language
1 English
2 Chinese