manualshive.com logo in svg

Tiger Technology Tiger Box 1U8, Assembly Manual, Page: 23 / 29

Share
Download
Tiger Technology Tiger Box 1U8 Assembly Manual Download Page 23

Tiger Box 1U8 Assembly Guide                                                                                                                                                                        

System Restore: System Restore

23

4.

Slide in the new power module and hear the side tab click into the bay.

5.

Plug the power cable in the module's socket and power on the appliance.

System Restore

Important: 

Do not plug the USB flash drive from your Tiger Box appliance 

shipment in the USB port of any other computer.

Use the USB flash drive included in your Tiger Box appliance shipment to restore the 
appliance to the factory default settings in case of system malfunction or failure.

Important: 

All your settings (IP addresses, defragmentation preferences, password 

for the web interface, etc.) will be lost after restoring the system to the default factory 
settings.

Follow the instructions below or contact Tiger Technology support for assistance at:
[email protected]

Summary of Contents for Tiger Box 1U8






























Reviews:

No comments