Tiger Box 1U8 Assembly Guide
Site Installation: Connecting
13
2.
Using your index finger, push inward the release latch at each side of the bezel and
slightly push the bezel to the front panel until you hear a clicking sound.
To remove the bezel, with your index finger push inward the release latches at each
side of the bezel and gently pull it away from the front panel:
Connecting The Appliance to The Power
Your Tiger Box 1U8 is shipped to you with two power supply modules, installed in the
rear of the appliance. These modules supply redundant power to Tiger Box - should a
power supply module fail, you can replace it while the system is operating (see
“Replacing a Failed Power Module” on page 21). You can replace a failed power
module only with a power module of the same model.
