background image

Thunder ATX Motherboard

Page 4

1.1.2 T-815E+S Classic motherboard series

Support Intel Pentium III FCPGA, Celeron PPGA or Cyrix III Processor on
Socket 370
Support 66/100/133MHz Processor Front-side Bus (FSB).

Intel 82815/82801AA Chipset (not for +P option).

Integration with AGP4x Graphics Controller inside Intel 82815/82801AA chipset
(excluded with +P option)

Dynamic Graphics Memory Allocation on System Memory
Hardware Motion Compensation for Accelerated DVD Video Playback
High Graphics Resolution up to 1600x1200 with 8-bit Colour
Full Support for Microsoft Direct 3D and Direct Draw

Intel 82815EP/82801AA Chipset (for +P option).
Full Software Configurable: CPU Plug-and-Play and Full Jumperless
Three DIMM slots Supporting up to 768MB Memory Capacity
Support 133MHz PC133 SDRAM DIMM
Suspend-to-RAM (STR) Technology to support Instant ON
AGP 2.0 Compliant Slot Supporting 4x Mode to get 266MHz Graphics Bandwidth
1 x AMR slot, 5 x PCI slots, 1 x AGP slot
2 x USB ports, 1 x PS/2 mouse port, 1 x PS/2 Keyboard port, 1 x IrDA port
1 x FDD port, 1 x LPT port, 2 x COM ports
Dual IDE Channels Supporting Four Ultra-DMA33/66 IDE Devices
Support Keyboard and PS/2 Mouse Wakeup
Modem Ring Wakeup with External Modem
Interface Header to Support Wake-On-LAN Enabled Ethernet Card
System Health Monitoring with Win95/98/Me/NT/2000 Support
AMI Flash BIOS, PC99/ACPI/DMI Compliant
ATX format, 305mm x 170mm PCB

Integrated AC97 Audio Onboard (excluded from model T-815E+ Classic)

AC97 2.1 Compliant Codec with 3D Stereo Enhancement
Complete Driver Support for Win95/98/Me/NT/2000
1 x Line-out, 1 x Line-in, 1 x Mic-in
1 x CD-in, 1 x AUX-in, 1 x Telephony Port, 1 x Game Port

Summary of Contents for T-815E+S





















Reviews: