Tiffen Steadicam M-2, System Manual, Page: 22 / 54

22
T
he new modular 1.58” posts for the M-2 system offer maximum rigidity whether they’re built short, or at
full extension, and they’re compatible with the M-1 stage and base. This modularity allows users quick
access to the stage, gimbal and base components for future upgrades, mods and maintenance.
Upper
Post
Stage Connector
Electrical and mechanical junction to the stage
Removable to allow access to gimbal
Safety Line
Inside posts
Prevents hyper-extension
Lower
Post
Base Connector
Electrical and mechanical
junction to the base
Post Lock
Over-center, tools-free lock
Shown here closed
Reference Lines
Etched into rear of both posts
Turns red at full extension
Confirms alignment
TIP: Check out the
complete specifications
for the two 1.58” and
the two 1.75” posts at
the back of this manual.
NOTE: The post section of this user guide covers product numbers 158-2SP, and 158-2SSP. For product numbers 175-2SIP, and 175-
3SIP, refer to the original M-1 manual (LIT-815000.)
Post components