U
SER
G
UIDE
3
S
AFETY INSTRUCTIONS
Use exclusively the power kit supplied. Plug the power directly into a wall socket properly earthed.
In case of a model without the ON/OFF switch, place the device as close as possible to the 230V
wall outlet. The mains plug must be easily accessible. To turn off the router, power connection
must be removed from the wall outlet.
Do not place the system where the power cable can be stepped on.
Do not place objects on the power cable.
If you need to disconnect the power for installation jobs, be sure to unplug the power
from the wall socket.
GSM antennas and / or Wi-Fi, where the router model requires their use, must not be placed in a
stable manner at a distance of less than 20 cm from all persons.
In case of a model equipped with rear bush for grounding (see picture): connect the device to the
power system ground via lug and yellow-green cable.
S
IM INSERTION
/
EXTRACTION
(Only for models in which it is provided)
Please, refer to the SIM Installation User Guide, available on Tiesse's website:
CAUTION
! Before removing the cover:
Turn off the device
Unplug the telecommunication cables (xDSL, ISDN)
Unplug the power cable from the wall socket
Unplug GSM or Wi-Fi aerials if present
After you worked on the router:
Close the device and secure the cover as shown in the instructions
Plug the power cable into the wall socket
Plug the telecommunication cables (xDSL, ISDN)
Plug GSM or Wi-Fi aerials if present
Turn on the device
I
F THE ROUTER DOESN
’
T WORK
Do not intervene, in any way, on the device
Contact Tiesse via e-mail at [email protected] to begin the process of repair or
replacement under warranty.
