217
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
20.15
Configure 2 x 2 x Mono Peer-to-Peer Dialing Programs
A
2 x Stereo + 2 x Mono Peer-to-Peer
program includes two bidirectional stereo audio streams
and two bidirectional mono audio streams. Each audio stream can be configured as a separate
peer-to-peer connection to the same destination codec, or with different destination codecs. Each
audio stream can be configured with different transport, audio and backup settings.
Important Notes:
In most situations you need to create a dial only program in your Genie
Distribution codec. A compatible codec receiving the call will answer using a default
program. There is no need to create an answering program, however if you require
Output
Audio Source
options to be configured on the answering codec (e.g. file playback), it will
be necessary to create an answering program integrating these options.
Configuring 2 x 2 x Mono Peer-to-Peer Programs
Important Notes:
Before you start program configuration please note:
·
You cannot edit a program when it is currently loaded in the codec.
·
or multistream program in a codec to ensure it
cannot be unloaded by a codec dialing in with a different type of program. For
example, if a multistream program is not locked it will be unloaded by a mono or
stereo call.
·
Session port 9002 is used by default for all audio streams. If you connect to a G3
codec using IP2 you will need to change the session port on the Genie Distribution
codec to 9012 for the second audio stream connection, as this is used by default on
G3 codecs for IP2.
·
Some drop-down menus and settings may be greyed out intentionally depending on
features available and the transport selected (e.g. IP or ISDN).
·
It is possible to save a program at several points throughout the program wizard and
use default settings to save configuration time.
·
To learn more about programs see the section titled
·
The stereo audio streams are configured first and then the two mono audio
streams.
·
Failover is not available with SIP and SmartStream PLUS redundant streaming is
not available with SIP or sessionless IP.
·
POTS is not supported for stereo audio stream connections.