169
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
Answer Routes for Non-Tieline POTS Codecs
In some situations you may receive a call from a non-Tieline POTS codec which doesn't support
Dial Route
tags. In this situation you can still specify the audio stream
Route
on the answering
codec using
Config 1 or 2
in
POTS Answer
. You can also select the default algorithm.
For example, if a call from a non-Tieline codec is received via POTS
Module 1
(i.e. no
Dial Route
has been specified in the dialing codec):
1. Click the
Edit
button to configure settings.
2. Select an answering
Route
for this POTS module in one of the two
Configs
available in the
POTS Answer panel
, e.g.
Route1
, then select the default
Encoding
algorithm
Other
(Note:
Other
is used for connecting to Comrex POTS codecs).
3. Click
Save
to store the new
Config
settings.
4. This will associate the incoming call with a corresponding
Answer Route
configured in the
codec answering program, e.g.
Answer Route 1
as displayed in the following example.
20.10
Configuring Codec Input/Output Settings
Open the HTML5 Toolbox Web-GUI and click
Audio
in the
Menu Bar
, then click
Inputs
to display
the
Inputs panel
.
Important Note:
15 volt phantom power can only be supplied on the Auxiliary input; this
is disabled by default.