8
INSTALLATION
For convenient installation, the IW-B7, IW-C7 and IW -SR30 use a dog-leg mounting system.
(See illustrations below). This provides a quick and clean install. Furthermore, the dog-legs can
be removed if a particular situation requires to speaker to be directly attached to a stud.
1) Make an appropriate size speaker mounting cutout in the wall material.
2) Run the wire from the amplifi er to the cutout. Allow an extra foot of wire at the cutout.
Strip 1/2” (12mm) off the wire, and tightly twist the wire strands together.
3) Remove the speaker grille.
4) Insert the speaker wires into the spring terminal binding posts.
Important:
Typically, one side of the wire is smooth. Connect this side to the – (black)
speaker terminal. The other side has a rib or stripe. Connect this to the + (red) speaker ter-
minal. Connect wire at the amplifi er in the same way. Failure to do so will result in degraded
sound.
Warning!
To prevent electrical shock, always switch off the amplifi er or receiver when mak-
ing connections to the speaker system.
5) Place the speaker into the rough opening and level it.
IW-B7 and IW-C7
Terminals
IW-SR30
Terminals
IW-B7, C7 and IW-SR30.indd 8
IW-B7, C7 and IW-SR30.indd 8
7/18/08 12:38:13 PM
7/18/08 12:38:13 PM
