Introduction
This low cost, synthesised RF signal generator features a wide amplitude range, low noise and
inherently good frequency stability. The generator also features internal and external FM. The
instrument can be operated manually via the front panel or remotely controlled via the RS232
(standard) or GPIB (optional) interfaces. It is suitable for FM radio receiver sensitivity
measurements, system gain measurements, oscillator substitutions, EMC/antenna/field strength
measurements and as a signal source for many other RF circuit and system development tasks.
In addition, the generator's low cost, ease of use and remote control make it eminently suitable
for most production and development applications where a basic, stable signal source is required.
Table of Contents
Specifications
2
EMC
5
Safety
6
Installation
7
Connections
8
Front Panel Connections
8
Rear Panel Connections
8
Operation
9
General
9
Step Size
10
Setting Frequency
10
Setting Level
10
Modulation
11
Storing and Recalling Set-ups
11
Remote Operation
12
Address and Baud Rate Selection
12
Remote/Local Operation
12
RS232 Interface
12
Remote Commands
19
Maintenance
22
Appendix 1. Error Messages
23
Appendix 2. Factory Defaults
24
Instructions en Francais
25
Bedienungsanleitung auf Deutsch
46
Istruzioni in Italiano
66
Instrucciones en Español
86
1
