Thrane&Thrane Sailor 6081, Installation & User Manual

Page: 56 / 68

Appendix B: Upgrade
Upgrading with additional SAILOR 6080 units 49
BBBB
Upgr
ade
Upgrading SAILOR 6081 with 2 SAILOR 6080 units (detailed)
To add 1 SAILOR 6080, proceed as described in Upgrading SAILOR 6081 with 1
SAILOR 6080 (detailed) on page 47.
1. Repeat steps 1 to 5 from
the previous page.
2. Connect SAILOR 6080 to
SAILOR 6081:
a) Put the SAILOR 6080 in place.
b) Connect AC cable from SAILOR 6081 to SAILOR 6080.
c) Connect DC1 from SAILOR 6080 to P3 in SAILOR 6081.
d) Connect control data from SAILOR 6080 to C3 in SAILOR 6081.
3. Attach the protective lids when all cables are connected.
4. Fasten all units to the wall mount tray with the 4 mounting bolts
(M6x140 mm).
Note
Steady the
upper SAILOR
6080 manually
until the
additional
SAILOR 6080 is
placed on top
and the
mounting bolts
are inserted and
fastened.
SAILOR 6081
SAILOR 6080
Mains AC DC1 DC2
SAILOR 6080
Mains AC
SAILOR 6080
Mains AC
Connector
panel
P1
C
1
DC1
Co
n
tr
ol
da
ta
DC1 DC2
C
1
Co
n
tr
o
l
da
ta
Co
n
tr
o
l
da
ta
P2
P3
DC2
C1
C2
C3
C4
P4
AC Power
Important
To ensure adequate cooling of the AC/DC Power Supplies
an unobstructed space of minimum 5 cm must be
maintained around all sides of the group of units (except
between the units and the bottom side).