Thrane&Thrane Sailor 6081, Installation & User Manual

Page: 55 / 68

Appendix B: Upgrade
48 Upgrading with additional SAILOR 6080 units
lid.
b) Connect the cable for Mains AC for SAILOR 6080.
5. Prepare SAILOR 6080 :
a) Take off the protective lid.
b) Attach black DC power cable (195 mm length) to DC2.
c) Attach black flat cable (225 mm length) to control data plug in SAILOR
6080.
6. Connect the SAILOR 6080 units to SAILOR 6081:
a) Put the SAILOR 6080 in place.
b) Connect AC cables as shown in the illustration.
c) Connect DC2 from SAILOR 6080 to P2 in SAILOR 6081.
d) Connect control data from SAILOR 6080 to C2 in SAILOR 6081.
7. Attach the protective lids when all cables are connected.
8. Fasten the SAILOR 6080 unit to the wall mount tray with the 4 mounting
bolts (M6x100 mm).
Important
To ensure adequate cooling of the AC/DC Power Supplies
an unobstructed space of minimum 5 cm must be
maintained around all sides of the group of units (except
between the units and the bottom side).