Chapter 4: Using the web interface
98-129217-A
Selecting the preferred BGAN satellite
82
Selecting the preferred BGAN satellite
Overview
By default the terminal is set up to automatically find the most appropriate satellite to connect to
(“Auto” mode). However, if you are located in an area with more than one BGAN satellite
available, you can select the satellite you prefer to use when registering on the BGAN network.
To select the preferred BGAN satellite
To select the preferred BGAN satellite, do as follows:
1.
Select
SETTINGS
>
Satellite selection
from the left navigation pane.
2.
Select the satellite you prefer to use.
If you select
Auto
(the default setting) the SAILOR 150 FleetBroadband system automatically
uses the most appropriate satellite.
3.
Click
Apply
.
Important
If you have any ongoing calls or data sessions, they will be terminated when
you click Apply!
