Chapter 4: Using the web interface
98-129217-A
Setting up the interfaces
72
Closed user group
Your subscription may include one or more closed user groups. A closed user group is a group of
users permitted to make calls to each other but not to users outside the group.
To define the settings for these user groups, do as follows:
1.
Select
SETTINGS > Common > Closed user group
from the left navigation pane.
2.
Type in your user group number(s) under
Group no.
Your airtime subscription lists your user group number(s).
3.
Select which group(s) should be active.
If you select
Subscribed
, the group(s) included in your subscription will be active.
4.
To allow outgoing access for the activated user group(s), select
Outgoing Access
under
SETTINGS FOR ACTIVE CLOSED USER GROUP
. Note that if you selected Subscribed above, this
setting will not be used.
5.
Select
Preferential
if you want the activated user group to be selected when a member of a
user group does not specify the group number during call set up. Note that if you selected
Subscribed above, this setting will not be used.
6.
Click
Apply
.
