Chapter 4: Using the web interface
98-129217-A
Setting up the interfaces
65
Configuring the Phone interface
To enable/disable incoming calls on the Phone interface do as follows:
1.
Select
SETTINGS
>
Phone
from the left navigation pane.
2.
Select
Standard
if you want to be able to receive calls through the Phone interface.
Only calls with Standard call type are accepted.
If you clear the box you cannot receive calls through the Phone interface, but you can still use
the Phone interface to make calls from the terminal.
3.
Click
Apply
.
Setting the common interface settings
Overview
The settings under COMMON are common for all interfaces. Note, however, that in order to use the
common Access Point Name for an interface, you must select
Common
for the APN setting when
setting up the network user group.
Definition of Access Point Name (APN)
The APN is used by the network user to establish a connection to the required external network.
This means that the terminal must know the APN in order to be able to connect to the external
network.
APNs are provided from the Airtime Provider. They may also be defined on the SIM card.
