Chapter 4: Using the web interface
98-129217-A
Setting up the interfaces
58
3.
Click
Edit
next to
Group 0
.
If you want, you can change the name of the group to something more meaningful, e.g. to
“Bridge mode”.
4.
At
Status
, select
Enabled
.
5.
Select
Dynamic IP address
.
This is the IP address used externally on the satellite network.
If you want to use a
static IP address
, and your subscription allows it, you must still leave this
setting at
Dynamic
. Then select
SIM default
in step 7. and type in the APN user name and
password from your provider in step 8.
Your terminal will then use the static IP address set up for your SIM card.
6.
Set
IP Header compression
to
Enabled
or
Disabled
.
For information on IP Header compression, see
Note
Typing in a static IP address is currently not supported by the BGAN network.
