Chapter 2: Getting started
98-129217-A
Standard connection to the Internet (default)
20
Standard connection to the Internet (default)
By default, the terminal does
not
automatically connect to the Internet when you connect your
computer or other equipment to the LAN interface. You must activate your connection from the
Dashboard in the web interface or from the Thrane IP Handset.
Activating the connection from a computer (web interface)
To activate the connection from a connected computer, do as follows:
1.
Access the web interface by opening your browser and entering the IP address of the terminal
in the address bar (default IP address is 192.168.0.1).
2.
Click
Start Standard
under
PROFILES ON LAN
at the bottom of the page.
3.
Check the connection e.g. by entering a web site.
The field ONGOING DATA SESSIONS will show the IP address for the data session you started.
Activating the connection from the Thrane IP Handset
To activate the connection from the Thrane IP Handset, do as follows:
1.
Connect the Thrane IP Handset to one of the LAN ports (preferably port 1).
The handset starts up automatically.
2.
Select
Menu > BGAN
.
3.
Select
Connect
.
4.
Use the left/right keys to find the network user group for the application you want to start.
5.
Press
Start
to start the connection.
A confirmation window is displayed.
6.
Press
Yes
to continue.
The Thrane IP Handset sends a command to the terminal to start the selected connection.
Note
This section only describes a Standard Internet connection with default settings on the
terminal. For information on other scenarios, see
