Thrane&Thrane SAILOR 150 User Manual Download Page 101

Page: 101 / 128

Chapter 4: Using the web interface

98-129217-A

Help desk and diagnostic report

Help desk and diagnostic report

Accessing the Help desk

If you need help

with airtime-related issues

you may call the Help desk. By default, the Help desk

is the phone number for your Airtime Provider, if it is available on the SIM card.

To access the Help desk, select

HELP DESK

from the left navigation pane.

If the Help desk number is available on the SIM card, the number is displayed as a link. To change
the number, click the link, change the number and click

Apply

If you need help

with terminal- or antenna-related issues

call your local distributor.

Generating a diagnostic report

The diagnostic report contains relevant information for troubleshooting. When contacting your
distributor for support, please enclose this file.

To generate a diagnostic report, do as follows:

Click

Generate report

from the

HELP DESK

page.

In some browsers the file may open directly in your browser. If it does, choose

File > Save As

to save the file.

Choose a location for the file and save it.

Summary of Contents for SAILOR 150

































































































































Search results

Summary of Contents for SAILOR 150

Reviews:

Related manuals for SAILOR 150

Brands by name

Popular brands

Thrane&Thrane SAILOR 150, User Manual

Search results

Summary of Contents for SAILOR 150

Reviews:

Related manuals for SAILOR 150

Brands by name

Popular brands