THORLABS WFS20-14AR, Operation Manual

Page: 142 / 153

© 2007 - 2018 Thorlabs 140
Wavefront Sensor
8.10 Safety
Attention
The safety of any system incorporating the equipment is the responsibility of the assembler of
the system.
All statements regarding safety of operation and technical data in this instruction manual will
only apply when the unit is operated correctly as it was designed for.
The Wavefront Sensor must not be operated in explosion endangered environments!
Do not obstruct the air ventilation slots in the housing!
Do not remove covers!
Do not open the cabinet. There are no parts serviceable by the operator inside!
This precision device is only serviceable if properly packed into the complete original packaging
including the plastic foam sleeves. If necessary, ask for replacement packaging. Refer servicing
to qualified personnel!
Only with written consent from Thorlabs may changes to single components be made or com-
ponents not supplied by Thorlabs be used.
The instrument must only be operated with a duly shielded and low resistance USB cable de-
livered by Thorlabs.
Attention
Prior to applying power to the Wavefront Sensor, make sure that the protective conductor of the
3 conductor mains power cord is correctly connected to the protective earth ground contact of
the socket outlet! Improper grounding can cause electric shock resulting in damage to your
health or even death!
Ensure that the line voltage setting of the fuse holder at the power supply agrees with your local
supply and that the corresponding fuses are inserted. If not, please change the line voltage set-
ting.
To avoid risk of fire, only the appropriate fuses for the corresponding line voltage must be used.
All modules must only be operated with duly shielded connection cables.
Users that change or modify the product described in this manual in a way not expressly ap-
proved by Thorlabs (party responsible for compliance) could void the user’s authority to operate
the equipment.
Thorlabs is not responsible for any radio television interference caused by modifications of this
equipment or the substitution or attachment of connecting cables and equipment other than
those specified by Thorlabs. The correction of interference caused by such unauthorized modi-
fication, substitution or attachment will be the responsibility of the user.
Attention
The following statement applies to the products covered in this manual, unless otherwise spe-
cified herein. The statement for other products will appear in the respective accompanying doc-
umentation.
Note: This equipment has been tested and found to comply with the limits for a Class B di-
gital device, pursuant to Part 15 of the FCC Rules and meets all requirements of the Canadian
Interference-Causing Equipment Standard ICES-003 for digital apparatus. These limits are de-
signed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television reception, which