29
Chapter 6 Software Reference
6.1 GUI Panel
The following screen shot shows the graphical user interface (GUI) displayed when
accessing the controller using the APTUser utility.
Fig. 6.1 TLS001 Laser Source Software GUI
Output Control
- used to adjust and set the output power of the laser, as displayed
in the main digital display.
Output Power Display
- shows the output power of the laser.
Laser Current Display
- shows the actual output current of the laser.
mW and dBm LEDs
- lit when the associated display units are selected - see Section
Key Switch LED -
lit green when the front panel key switch is turned ON, red when
the switch is OFF - see Section 4.2.
Note
The serial number of the TLS001 unit associated with the GUI panel, the
APT server version number, and the version number (in brackets) of the
embedded software running on the unit, are displayed in the top right
hand corner. This information should always be provided when
requesting customer support.
