Fiber-Coupled Laser Source
Chapter 5: Operation
Page 6
18651-D02
Chapter 5
Operation
5.1.
Front and Back Panel Overview
Figure 2
Front and Rear Panels of Laser Source
3½ Digit Display
Laser Output Aperture
FC/PC PM Fiber Optic
Connector
AC Power Cord Connector
Cover Screws (2)
Remove to access
line voltage switch
and fuse
Laser Output
Aperture Cover
Cover should be
installed on FC
connector when
fiber removed
Laser Enable Switch
Press to activate laser
Laser Emission Indicator
Lights up 5 seconds before laser turns
on
Keylock Power Switch
Turn on power to the unit.
Key only removes when off
Power Adjust Knob
Remote Interlock Input
Modulation Input
0 to 5 V Max, 50 Ω
Voltage Type Cap Screw Indicator
