THORLABS PM102, Operation Manual

Page: 14 / 30

© 2019 Thorlabs 9
PM102x
3.2.2 PM102
PM102 Special Features
The PM102 features a number of additional options, due to the DA-15 output connector.
The PM102 is per default configured to RS232 configuration (+/- 5 V voltage level). This can be
changed to a UART configuration (0/5 V voltage level) so that the PM102 can be accessed by
external micro-controllers for instrument control and data export. The PM102 can also be adjus-
ted to accommodate micro-controllers using 3.3 V.
1. DA-15 Interface
2. Two Auxiliary I/O ports
3. NTC input
4. Three Analog Output Ports
5. Autonomous Operation to Analog Output
6. Optional Use of 5 V - 36 V Power Supply
7. RS232 Operation
8. Adjustable Baud Rate via USB or Serial Communication (SCPI commands); The default
BAUD Rate is 115200 Bit/s.
9. UART Operation (i.e. for Control via an External Micro-Controller)
10.Instrument Control using SCPI commands (Serial Communication)
11.Power Meter Control and Output via USB
19
13
14
14
14
15
12
13
13