THORLABS M2MS Operating Manual Download Page 25

Page: 25 / 167

BP209 Series

6 The Graphics User Interface (GUI)

Rev: 8.1, 14-Feb-2022

Page 23

6.1.6 Help Menu

Click "Contents", the first entry within the help menu, or press the "F1" key on the keyboard to
open the online help file, which contains all information included in this manual.

With a click on the link

Visit the Thorlabs Website

this website is

opened in the browser window.

View Thorlabs (LPGL) License Agreement

will open the license files

of the installer package.

Check for Update

searches for available software updates.

About Thorlabs

displays device information and software versions details:

If you have trouble with the software, please submit the version of the application to Thorlabs.
This can help to resolve your problem.

Summary of Contents for M2MS







































































































































































Search results

Summary of Contents for M2MS

Reviews:

Related manuals for M2MS

Brands by name

Popular brands

THORLABS M2MS, Operating Manual

Search results

Summary of Contents for M2MS

Reviews:

Related manuals for M2MS

Brands by name

Popular brands