THORLABS M2MS, Operating Manual

Page: 24 / 167

BP209 Series 6 The Graphics User Interface (GUI)
Page 22
21424-D02
6.1.4 Windows Menu
When the GUI is started the first time, the Default Workspace is
opened. To close and open the windows, toggle the corresponding
entry in the windows menu or via the
Tool Bar .
An open child window can also be closed by clicking the
S
in the up-
per right corner of the child window.
6.1.5 View Menu
From this menu entry, a number of pre-configured child window arrange-
ments ("workspaces") can be quickly selected:
·
Default: Settings panel, Numeric results, 2D reconstruction, 3D profile
·
Profile: 2D reconstruction, 3D profile, numeric results, X and Y profiles
· M²: Beam Quality Measurement, X and Y profiles
· Empty workspace
Further, the active child windows can be arranged, tiled, and cascaded.
"Maximize Diagrams" turns off the side and top toolbars in all child win-
dows simultaneously, " Show Toolbar and Legends" turns them on
again.
"Save Current / Load Workspace" saves your Beam Software GUI appearance to a ini-file
that can be loaded at any time.
"Recent Files" lists recently used workspace files so that you can quickly load often used
workspaces.
24