23
K-Cube Solenoid Controller
4.4.8 Menu Option - Select Stage
For correct operation the solenoid type being driven must be selected to enable
default operating parameters to be loaded. At this time, the only solenoid devices
available are the SH05 and SH1. Both of these devices are driven by the SH05 option
which is loaded on start up as default. Other solenoid devices will be available in the
future.
Press the MENU button, then use the wheel to scroll
through the menu options.
Press the MENU button to enter the Select stage option.
Use the wheel to scroll to the required option. .
Press MENU to store the selection and return to the main
display.
S o l e n o i d O f f
M o d e i s M a n u a l
M e n u o p t i o n s
U s e w h e e l
M e n u o p t i o n s
7 S e l e c t s t a g e
MENU
S e l e c t S t a g e
S H 0 5
S o l e n o i d O f f
M o d e i s M a n u a l
