29
K-Cube Brushed DC Servo Motor Driver
4.4.10
Menu Option - Disable
In certain applications, it may be advantageous to disable
the wheel to remove the possibility of unwanted motion
due to accidental movement of the wheel.
Press the MENU button, then use the wheel to scroll
through the menu options.
Press the MENU button to enter the Disable option.
Press the MENU button to store the selection and return to
the main display.
4.4.11
Menu Option - Select Stage
Most of the stages compatible with the KDC101 controller are fitted with an
identification device. On power-up the KDC101 reads the stage identification and
loads the correct operating parameters associated with the stage. However, some
legacy stages are not fitted with an identification device. For correct operation these
must be selected manually after power up.
Press the MENU button, then use the wheel to scroll
through the menu options.
Press the MENU button to enter the Select stage option.
Use the wheel to scroll to the required option:
CR1-Z7, Z806, Z812, Z825, MTS50-Z8, MTS25-Z8,
PRM1-Z8, CR1-Z6, Z625, Z612 and Z606.
Press MENU to store the selection and return to the main
display.
A t 0 . 0 0 0 0 m m
H o m e d S t o p p e d V
M e n u o p t i o n s
U s e w h e e l
M e n u o p t i o n s
9 D i s a b l e
MENU
A t 0 . 0 0 0 0 m m
H o m e d S t o p p e d V
A t 0 . 0 0 0 0 m m
H o m e d S t o p p e d V
A t 0 . 0 0 0 0 m m
H o m e d S t o p p e d V
M e n u o p t i o n s
U s e w h e e l
M e n u o p t i o n s
1 0 S e l e c t s t a g e
MENU
C R 1 - Z 7
t o s e l e c t