THORLABS EXULUS-HD2, User Manual

Page: 6 / 57

EXULUS
®
Spatial Light Modulators Chapter 2: Safety
Rev F, December 7, 2020 Page 3
2.2. Product Care
Handle the complete system with care during transportation and unpacking.
Banging or dropping the system can damage the unit or lower the system
performance. If this occurs, the complete system will need to be sent back for
recalibration. Please contact Thorlabs Technical Support for more information.
•
Do not store or operate in a damp, closed environment.
•
Do not store or operate on surfaces that are susceptible to vibrations.
•
Do not expose to direct sunlight.
•
Do not use the solvents on or near the equipment.
•
Mobile telephones, cellular phones, or other radio transmitters should not
be used with a range of 3 m of this unit since the electromagnetic field
intensity may exceed the maximum allowable disturbance values,
according to EN50082-1.
•
Keep away from dust, dirt, and air-borne pollutants (including cigarette
smoke). The system is not designed for outdoor use. Protect the
equipment from rain, snow, and humidity.
•
Do not expose to mechanical and thermal extremes. Protect the
equipment from rapid variations in temperature.
•
Handle all connectors with care. Do not use unnecessary force, as this
may damage the connectors.
•
Handle the mainframe with care. Mishandling may cause the body injury.
•
Clean the protective window by using a soft, lint free cloth. Use of
isopropyl alcohol is permitted; however, do not immerse in any liquid or
solvent.
•
Clean any accessible optical surfaces with an appropriate optics grade
tissue or cloth.
2.3. Service
CAUTION
Except for the main fuse, which is accessible from the outside of the housing, the
EXULUS
®
SLM has no user-serviceable parts. Service should only be performed
by trained service personnel.
Only trained and approved Thorlabs’ personnel should service the system. Please
contact Thorlabs Technical Support at
techsupport@thorlabs.com and a member
of our team will be happy to assist you.