THORLABS ERM100 Operation Manual Download Page 35 | Manualshive

Page: 35 / 59

THORLABS ERM100 Operation Manual Download Page 35

© 2018 Thorlabs

5 Maintenance and Service

33

5

Maintenance and Service

Protect the ERM100 from adverse weather conditions. The ERM100 is not water resistant.

Attention

To avoid damage to the instrument, do not expose it to spray, liquids or solvents!

The unit does not need a regular maintenance by the user. It does not contain any modules
and/or components that could be repaired by the user himself. If a malfunction occurs, please
contact Thorlabs for return instructions.

Do not remove covers!

In order to ensure the specified measurement accuracy, the recommended factory recalibration
interval is 12 months.

5.1

Firmware Upgrade

Prior to start the firmware upgrade, please download the new version from our website, unzip it
and save it to a convenient to remember location on your PC.

Firmware upgrades can be done by the user via the USB interface. Therefore

install the DFU

(device firmware upgrade) wizard

from the distribution CD.

Connect the ERM100 to a USB port of your PC, switch it on and launch the DFU wizard from
the Start button:

Click "Next >" to continue:

«
...
33
34
35
36
37
...
»

Summary of Contents for ERM100




























































Reviews:

No comments