8
HA0343T Rev A Apr 2015
Chapter 3
3.2.2 Locking Mechanism
The stage is shipped with a plate fitted to th e side, which locks the carriage during
transit, and in applications where accidental adjustment is undesirable. The locking
screw on these plates should be loosened before the stage is used as shown below.
Fig. 3.1 Loosening the Locking Screw
3.2.3 Mounting Directly to the Work Surface
Referring to Fig. 3.2, proceed as follows:
1) Adjust the actuator to position the moving carriage such that the mounting holes
in the base are clearly visible through the holes in the top plate.
2) Fit four bolts (M6 x 10 or 1/4-20 x 3/8”, not supplied) through the holes in the top
platform and tighten to secure the stage to the work surface.
Fig. 3.2 Bolting the stage to the work surface
Loosen this screw before use
Mounting holes
(2 at each end of
platform travel)
1
2
1
