THORLABS DMH40-F01, Operation Manual

Page: 29 / 66

© 2021 Thorlabs
4 Operation
24
4.6.5.1 Individual Segment Control
Single Segment Control
The individual segment voltages can be changed:
1. Move the mouse over the segment. When the segment voltage is displayed, turn the mouse
wheel. The segment color changes in accordance with the voltage:
2. Hover the mouse over the segment, then click right mouse button. A dialog opens.
Shifting the slider results in a coarse voltage change (see displayed numeric value and seg-
ment color). Alternatively, you can input the desired voltage numerically. Finally, using the
mouse scroll wheel (or cursor buttons), the segment voltage can be changed with the following
increments:
Increment
Ctrl + Mouse Wheel (
ßáâà
) 0.2 V
Mouse Wheel (
ßáâà
) 1.0 V
Shift+ Mouse Wheel (
ßáâà
) 10.0 V
Note
"Restore (Ctrl+A)" resets the voltage of all segments to 150 V. Additionally, all Zernike sliders
are set to zero.
4.6.5.2 Control in Arbitrary Groups of Segments
Left click on a segment to select it. Selected parts appear with a red rim. Place the mouse
pointer over a selected segment and turn the mouse wheel. The voltages of all selected ele-
ments will change with the same increment:
Notes