THORLABS DCC1 45 Series User Manual Download Page 17 | Manualshive

Page: 17 / 420

THORLABS DCC1 45 Series User Manual Download Page 17

12

DCx camera

© 2010 Thorlabs

1

Introduction

1.1

Safety Information

The product must be connected, taken into operation and maintained only by appropriately qualified
personnel.
The error-free and safe operation of this product can only be ensured if it is properly transported,
stored, set up and assembled, and operated and maintained with due care.

1.2

Operating Environment

Please comply with the requirements for the proper use of this product. Failure to do so will render
the warranty void.
Do not subject this product to direct sunlight, moisture or shock. The environmental conditions
specified in chapter Specifications

are required.

1.3

Trademarks

IBM PC is a registered trademark of International Business Machines Corporation.  MICROSOFT and
WINDOWS are trademarks or registered trademarks of the Microsoft  Corporation.  All other products
or  company  names  which  are  mentioned  in  this  manual  are  used  solely  for  the  purpose  of
identification and/or description and can be the trademark  or registered trademark  of the respective
owners.

386

«
...
15
16
17
18
19
...
»

Summary of Contents for DCC1 45 Series





































































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands