THORLABS BC207UV, Operating Manual

Page: 25 / 181

BC207 Series
Chapter 5: The Graphics User Interface (GUI)
Rev: 8.1, 10-Jan-2022
Page 18
© 2022 Thorlabs
This function may be useful in combination with a trigger mode while waiting for the next image
orfor a synchronous restart of all plots and time-based measurements.
Note
The measurement of all beam parameters and the accumulation of calculated data is started
automatically with the software start. "Clear Windows"
deletes all accumulated data and re-
starts the measurement.
Start NI Network Variables
This feature is a data interface for handing over the parameters listed below to an external pro-
gram environment such as LabVIEW.
· Saturation (in %)
· Total Power
· Base Line X and Y
· Peak Value X and Y
· Distance of Peak to Reference Position X and Y
· Distance of Centroid to Reference Position X and Y
· Sigma X and Y
· Beam Width Clip X and Y
· Ellipse Diameter Min and Max
· Gauss Diameter X and Y
· Ellipticity
· Camera Temperature
· Pixel Pitch
· User Power Offset
·
Serial Number
·
Reference Position X and Y
Note
In order to use this command, you need to have installed additional National Instruments
®
soft-
ware (Distributed System Manager, NI CVI Runtime Engine).
5.1.3 Options Menu
These entries allow changing the device (Beam Profiler) and application (GUI) specific settings
and let you choose a language.
Beam Settings