●
Dispose all the packaging safely and keep out of the reach of children
●
It is normal that water drops may appear on the plastic and the door
glass as a result of the manufacturers testing process
●
Before installing your washing machine, check for any external visible
damage. Do not install or use your washing machine if it is damaged
●
Ensure that the water inlet, hoses or power cable are not damaged
while pushing the product into its place after installation or cleaning
●
This appliance must be installed on a flat surface
●
Never place your washing machine on carpet
●
Don’t install washing machine in an area that may be damp
●
Don’t install washing machine in direct sunlight
●
Ensure that the surrounding temperature of the appliance will not
drop below 0 °C
●
Tilt the appliance gently backwards to remove packaging
●
Remove the four transit bolts and the rubber washers from the back
of the machine by turning anti-clockwise with a suitable spanner. Pull
out the remaining plastic section of each transit bolt and insert the
blanking caps
●
The distance between the machine and the wall should be 10cm
●
To level the machine, use a spanner to turn the locknuts in a clockwise
direction. Then turn the locknuts together and adjust feet to unscrew.
Use a spirit level to check that the machine is level. Hold the
Adjustable feet securely with a pipe wrench. Turn the locknut again
Using the spanner until it sits firmly up against the housing
Levelling Continued -
7
