THOR Jayco TALON 2021, Owner'S Manual

Page: 53 / 209

51
Section 4: Vehicle Operation
 At the top of the Touch Panel screen press the
“CONNECTED” icon quickly 6 times.
 A GEAR icon will appear at the top of the screen
that says “OPTIONS”. Press this GEAR icon.
Screen display changes to “ Select Operation ”
with arrows on the left side of the screen. Use to
arrows on left side of screen. Scroll to “WIRE-
LESS CONFIG”.
 Press the ENTER button at the bottom of the
screen.
 The screen will display “Wireless Configura-
tion Press any Linc button to sync”
.
 Press any button on the remote control while in
Leveler mode and the remote will be connected.
Pressing the ABORT button on the touch screen will cancel
the configuration sequence.
The following functions can be operated using the Linc
Remote Control. Refer to the Lippert Ground Control 3.0
manual for complete instructions.
 Basic Jack operation
 Unhitching Instructions
 Auto Leveling
Troubleshooting
Refer to the Lippert Ground Control 3.0 manual for troubleshooting information which in-
cludes the following:
 OneControl Touch Panel Error Codes
 Special Jack Error Codes on the OneControl Touch Panel
 How to manually override the jack motor
 Setting Zero Point Calibration
 Zero point is the programmed point that the RVwill return to each time the Auto
Level feature is used. Zero Point is only available on the OneControl Touch Panel.
 Preventative Maintenance tips
OneControl Touch Panel
Stabilizer Jacks
The stabilizer jacks must be fully retracted before moving or towing the RV to
prevent stabilizer jack damage.
Each stabilizer jack can be individually adjusted to stabilize the RV for use.
When setting up on soft ground, you may wish to place a wood pad or the equivalent under
each stabilizer jack foot to help keep the jack from sinking into the ground.
DO NOT USE THE STABILIZER JACKS TO LEVEL THE RV.
It is important to remember that the stabilizer jacks are to be used only for
support while occupying and moving around the RV. They are not designed to
support the weight of the RV.