English
13
Parental Guidance
Programmes with a Parental Guidance Rating can be blocked from viewing
and opened only with a Password. To setup this feature, enter your password
first. Then select an age, above which the channel must be protected.
Options are:
Off, 1 to 18
. Default is
Off
.
Set password
To set another password than the default one, enter the old 4-digit
password first, then enter a new password and confirm it, by entering it
again.
Restore Factory Default
Reset your receiver to the default factory settings. Sometimes useful if the
unit suddenly behaves in an unexpected manner, e.g. after a power failure.
Select
System
then
Restore Factory Default
in the main menu and press
OK
to select. Enter your password or the
DEFAULT password: 1234
and press
OK
to confirm. Note: This option will delete all your channels, Favourite lists
and settings. The receiver will reboot and start with the initial
Installation
menu.
Information
This submenu shows receiver specific information such as hardware and
software version. Please have the
Information
screen on hand when you call
our hotline. The person who answers your call might ask for the information
given in this screen.
Software Update
This feature allows you to update the receiver software via the USB port.
When a new software is available for your receiver, it can be downloaded
from our website. Place the software file (unzipped) in the root directory of
your USB storage device (HDD, memory stick etc.) and connect the device
to the USB port of the receiver. First a message box will appear that a USB
device is found. Then go to the
System
menu and select the
Software
Update
option. Select the correct file in the list. Press
OK
to start update.
When ready, the unit will reboot automatically.
Recall List
If set to
On
, a list of last watched channels will be displayed in viewing
mode, when the
RECALL
button on the remote control is pressed. Choose
the channel to go back to and press
OK
. If set to
Off
, the
RECALL
button will
instantly return to the previous watched channel.
Network Setting
Setup your Network connection to use the
Network Apps
.
Link Type
is LAN, for use with a wired network to a router/modem on the
RJ45 Ethernet port.
IP Setting
Press
OK
to open the submenu.
DHCP
If DHCP is set to
On
, the unit will auto-negotiate with the router/
modem for the correct IP settings, assuming the router/modem also being
set to DHCP
On
. This is the common default. If you like to use different
IP settings, switch DHCP to
Off
and to Edit, press
GREEN
and enter the
required numbers. However, some technical knowledge about TCP/IP
protocols is required.
MAC Address
Information about the unit's unique identification to the LAN port.
Status
Information about the current status of your Ethernet connection.
7.9 USB
Multimedia
This function allows playback of different kind of files from the connected USB storage device.
Select
Music
and press
OK
to playback MP3 files from your folders. Select
Photo
and press
OK
to
view your favourite pictures in JPG format. Select
Movie
and press
OK
to enter to play a number of
video formats. Select
PVR
and press
OK
, and select the HBPVR folder to show the recordings you've
made. The unit supports USB HDD devices with FAT32 format. However, it is possible to use already
on a PC formatted NTFS HDD device. Make sure your USB device is formatted correctly. Use the
On-Screen button suggestions and the multimedia buttons like
RECALL
(Return),
u
,
3
and
2
on the
remote control to work inside the multi media player.
Photo Configure
Setup your preferences for Photo viewing. Press
u
and photos will be
shown in an automatic slide mode.
