8
Choose the desired channel with the
pq
buttons. Alternatively, you can digit the channel number
with the
0~9
buttons on the remote control. Or press
OK
in viewing mode to display the channel list.
The volume can be adjusted with the
t
u
buttons.
Default Password is 1234.
6.0 OPERATION
Your new receiver is equipped with several features to make watching TV a true pleasure. This
paragraph describes these features. Please also read chapter
7.0
to get familiar with the menu of your
receiver.
6.1 Changing channels
Your new receiver is equipped with four ways to change channels.
Via direct access using the
0~9
buttons.
Via the channel list trough
OK
button.
Via the
PG+
and
PG-
keys.
Via the
pq
keys.
6.1.1 Direct access via 0~9 buttons
To gain direct access to a certain channel, simply input its number with the
0~9
keys on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits
is possible. Just wait a few seconds and your receiver will switch to the selected channel or press
OK
immediately after selecting the channel number.
6.1.2 Channel list
Press
OK
in viewing mode to display the Channel List. Use
pq
in the Channel List to highlight your
channel of choice and press
OK
once to select the highlighted channel.
TIP:
Use
t
u
to toggle between the
TV List
and
Radio List
, press
FAV
for a list
of available favourite lists, toggle between them, also with
t
u
.
6.1.3 Using the
pq
or
PG+/PG-
keys
p
switches to the next channel.
q
switches to the previous channel.
PG+
switches to the next 10 channels.
PG-
switches to the previous 10 channels.
6.2 Info Banner
While watching TV you can press the
INFO
button any time to get information about the current
channel and event*. Press
INFO
twice for programme information and some technical details about
the current channel.
* Event information is displayed when available. Availability depends on broadcast.
6.3 Selection of audio language
Some channels support a choice of audio formats and/or languages. To select another audio stream,
press
AUDIO
in viewing mode. A list with available audio streams will now be displayed. Use
pq
to
select the desired stream and confirm with
OK
.
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the
TEXT
button in viewing
mode and use the
0~9
buttons to input the number of the page you wish to see. The coloured
buttons of the remote control allow you to jump to selected pages immediately, as indicated on the
bottom of the teletext screen. Use the
pq
buttons to select one page up or down, use
t
u
buttons
to select subpages, if indicated at the bottom of the screen. Press
EXIT
or
TEXT
to get back to viewing
mode.
