ASSEMBLE THE MULTIFUNCTIONAL STEAM BROOM
Extension tube
1. Insert the threaded connector of the extension tube base into the main
unit (FIGURE 1-A).
2. Attach the handle firmly (FIGURE 1-B)
a. To adjust the tube correctly:
Push the button
①
, to verify that the metal tube has been firmly
installed
b. push it to pop it out (FIGURE 1-C)
TUBE BASE
A
B
B
C
Main head for the floor
1.
Align the mop head with the main unit as shown in (FIGURE 2), so
that the neck is positioned over the steam wand.
2.
Slide the main head into the steam outlet, pressing firmly until the
release button clicks into the hole.
3.
To remove the mop head, firmly press the release button while
pulling on the mop head to release it from the steam wand.
①
FIGURE 1
EN-10
