En
gli
sh
19
Playback in Full Screen Mode
As soon as you confirm a picture with
OK
, the slideshow is starting; depending which mode has been
selected. The multimedia buttons can be used as usual.
Press
MENU
or to exit the function.
Playback in preview mode
Use the
GREEN
Play Mode
button to change how the images should be played.
Slide Time
This is where you can set how long it takes to go to the next image during the
slideshow, select
3
seconds,
5
seconds,
7
seconds, and
OFF
.
OFF
only displays
individual images.
Repeat Mode
You can set the
RepeatMode
mode, whether the images are to be repeated
Random
all
All
or not
Off
at all.
Press
MENU
or to exit the menu.
7.5 Update
In this menu you can update the receiver via USB or OTA (= Over The Air /download via satellite).
Select the desired sub-menu using the
pq
buttons and press
OK
to continue.
7.5.1 USB Software Update
This function allows you to perform a software update using a USB storage device.
Download the appropriate software and update instructions from our website www.thomsonstb.net
and unzip them to your correctly formatted storage medium. Load the file (s) into the main directory
of your storage device, then connect it to your receiver. Turn the receiver on and wait until the storage
device is successfully detected.
1. Wait a few seconds (~ 10 sec.) Until the receiver displays a message that new software is
available. If no message is displayed, please try another storage device!
2. Use the
t
u
buttons to select
OK
and press
OK
to perform the update.
3. The receiver now changes to the update mode. Please wait until the update is complete!
4. Please remove the USB device as soon as the corresponding message is displayed from your
receiver!
To reboot after successful update, the USB device must be removed!
WARNING:
NEVER disconnect the receiver from the mains or switch the power OFF
during the update procedure. It can damage your receiver and warranty
will void! In case of an USB software update please consider that the
receiver may delete all channels, data and user settings in certain cases.
7.5.2 OTA Software Update
With the OTA (Over The Air) function, you can search for software updates via satellite. Ask your
THOMSON dealer or visit our website www.thomsonstb.net for more information. Only in the
case of an available update and appropriate handling the option will be available in the menu. It is
possible that you can also receive an update request after starting up the receiver. Updates which are
broadcasted via OTA are intended to improve and to enhance the product so it should be carried out
in your own interest.
Press
OK
on the
OTA Software Update
menu. The receiver starts with the software search. Follow the
further instructions on screen.
WARNING:
After the update the receiver restarts automatically! During the update
process NEVER disconnect the receiver from the mains, switch power
OFF or disconnect the receiver from the antenna cable! This can damage
your receiver and warranty will be void! In case of an OTA update please
consider that the receiver may delete all channels, data and user settings
in certain cases.