VoIP Business Phone Administrator Manual
Copyright ©2005 THOMSON All rights reserved.
.
Chapter 6
The remote control and monitoring tool
The ST2020 monitoring tool needs a login and a password:
LOGIN: admin
Password: ST2020
With TOOLS for Thomson ST2020, administrators are able to initiate the APS process or
switching the phones from normal call mode to Config mode by simply specifying the IP range
of the intended IP phones. For example, to upgrade 3 phones with IP address of 192.168.10.101,
192.168.10.104, and 192.168.10.108, the administrator will need to select an IP range in figure
6.1.
For TOOLS to function, the IP range and the PC running TOOLS must be within the same
subnet.
Icon for the ST2020 TOOLS
Specify the IP range of all the
targeted IP phones to be upgraded
Figure 6.1 ST2020 TOOLS IP range selection
The administrators are given 2 options with this program.
•
Shift
– switch the phone from normal call mode to config mode.
•
Upgrade
– Initiates APS on the phones.
- Page 43 -
Summary of Contents for ST2020
Page 1: ...Administrator Manual ...
