VoIP Business Phone Administrator Manual
Copyright ©2005 THOMSON All rights reserved.
.
4.2
Options available via IP Phone Web Interface
Admin:
This page allows you to change the password, reboot the SIP device and reset all settings to their
factory defaults. If you have changed any settings, you must reboot the SIP device before the
new settings take effect.
Table 4.2 Admin page
z
Administrator name:
displays the administrator name required to enter the settings page.
z
Password:
enters the administrator password.
z
Confirm password:
confirms the administrator password.
z
Save:
saves the new settings entered into this page.
z
Cancel:
cancels all changes made to settings in this page.
z
Reboot device:
restarts the device to save the new settings.
z
Reset to factory defaults:
resets all settings to their default values.
[Remark]
: Do not forget to save your changes and reboot to exit config mode.
- Page 27 -
Summary of Contents for ST2020
Page 1: ...Administrator Manual ...
