VoIP Business Phone Administrator Manual
Copyright © 2005 THOMSON
-All rights reserved
- Page 26
Chapter 4
Configuration via Web Interface
4.1
Configuration via Web Interface
The web interface is available only when the phone is in
config mode
. To enter
config mode
, select
[
menu
]
Æ
[
Config
] and wait for the following LCD display:
Ready for Config
10.0.0.147
Alternatively, you can hold down the
menu
button as you power-off/ power-on the phone and you
will directly start in
Config
mode. Or hold down menu button while you power-on if the phone was
off.
To access the web interface, you must open an http web browser and enter the IP phone’s IP address.
For example: http://10.0.0.147. Once the Enter key has been pressed, the browser will ask for a user
name and password:
Table 4.1 Connection page
Enter Username & password.
User
name:
administrator
Password:
784518
- Page 26 -
Summary of Contents for ST2020
Page 1: ...Administrator Manual ...
