VoIP Business Phone Administrator Manual
Copyright © 2005 THOMSON
-All rights reserved
- Page 18
[Adjust the Volume during A Call]
When an incoming call is received, the user may adjust the ringer volume by pressing
the
[vol-]
or
[vol+]
keys to decrease or increase the volume of the handset, headset or
speakerphone if you are in group listening mode. When you press the adjusting volume
keys, the corresponding LCD screen message is as follows:
LCD Screen
Description of Action
Volume: 5
When an incoming call is received, press:
[vol-]:
to decrease the ringer volume
[vol+]:
to increase the ringer volume
When a call is in progress, you also may directly press the
[vol-]
or
[vol+]
keys to
decrease or increase the volume of handset, headset or speakerphone. Once you have
pressed the volume adjustable keys, the corresponding LCD screen message is as
follows:
LCD Screen
Description of Action
Volume: 3
Pick up the call by Handset or Speakerphone. During the
conversation, press:
[vol-]:
to decrease the voice volume
[vol+]:
to increase the voice volume
2.4
Speed Dialing a Call
The following keys are used:
m1 m2 m3 m4 m5 SPKR
[Speed Dial]
-
Before using Speed dial, please refer to Chapter 3 or Chapter 4 which explain how to
enter your speed dial numbers. These are mapped to the
[m1]
to
[m5]
keys.
-
After hooking off or pressing
[SPKR]
key, pressing any of the
[m1]
to
[m5]
keys
dials
the
stored number immediately.
-
During conversation or in idle mode, this function is invalid.
-
The corresponding LCD screen message is as follows:
LED status LCD Screen
Description
SPKR-LED:
OFF
Dial:
XXXX
When pressing a
[mn]
key, the phone places a
call with the memorized number.
- Page 18 -
Summary of Contents for ST2020
Page 1: ...Administrator Manual ...
