manualshive.com logo in svg

THOMSON SpeedTouch 716, User Manual, Page: 67 / 110

Share
Download
THOMSON SpeedTouch 716 User Manual Download Page 67

Chapter 5

SpeedTouch™ Web Interface

E-DOC-CTC-20041126-0014 v3.0

65

5.5.8 IGMP Proxy

IGMP

The Internet Group Management Protocol (IGMP) is an Internet protocol that 
enables an Internet computer to report its multicast group membership to adjacent 
routers by means of IGMP messages.

IGMP proxy

However, when acting as a proxy, the system performs the host portion of the IGMP 
task as follows:

When it is queried, the system will send group membership reports to the 
group. 

When one of the hosts joins a multicast address group to which none of the 
other hosts belong, the system will send unsolicited group membership 
reports to that group.

When the last hosts in a particular multicast group leaves the group, the 
system will send a leave group membership report to the routers group.

The IGMP Proxy

Configuration page

The 

IGMP Proxy Configuration

 page allows you to enable/disable the IGMP proxy:

Summary of Contents for SpeedTouch 716















































































































Reviews:

No comments