THOMSON SpeedTouch 608, Cli Reference Manual

Page: 428 / 490

426
SNTP Commands
E-DOC-CTC-20040216-0002 v1.0
sntp list
Show a listing of added NTP servers and their current status.
SYNTAX:
EXAMPLE:
DESCRIPTION:
Following NTP server states are possible:
RELATED COMMANDS:
sntp list
=>sntp list
IP Address
Version Status
100.101.110.111 4 contacting ...
100.101.110.112 4 Unable to contact
100.101.110.113 4 Synchronized
=>
Not used The SpeedTouch™ SNTP client is disabled. As a consequence, none of the
NTP servers are used.
Contacting ... The SpeedTouch™ SNTP client is trying to contact this NTP server.
Unable to contact The SpeedTouch™ SNTP client is unable to contact this NTP server; it may be
down, or no end-to-end connectivity exists (no connection, no DSL, ...).
Synchronized The SpeedTouch™ SNTP client was able to contact this NTP server. If
required the internal clock has been synchronized with this NTP server.
sntp add Add a Network Time Protocol (NTP) server to the NTP server list to
synchronize the internal SpeedTouch™ real time clock (SNTP client) with.
sntp del Remove an NTP server from the NTP server list.