THOMSON SpeedTouch 608, Cli Reference Manual

Page: 350 / 490

348
Phonebook Commands
E-DOC-CTC-20040216-0002 v1.0
phonebook add
Add a phonebook entry.
SYNTAX:
where:
phonebook add name = <string>
addr = <atmchannel : PVC syntax is [port.]vpi.vci
port=dsl0|dsl1|...>
type = <{any|ethoa|pppoa|ipoa}>
name A free to choose phonebook name for the destination.
Two limitations apply:
•
The name of a phonebook entry intended for the Relayed PPPoA
(PPPoA-to-PPTP Relaying) packet service may not start with capital
P or capital T
•
The name of a phonebook entry intended for the PPP-to-DHCP
spoofing packet service must start with DHCP, e.g.
‘DHCP_Spoof01‘.
REQUIRED
addr The ATM address for this destination.
It is composed of a Virtual Path Identifier (VPI) and a Virtual Channel
Identifier (VCI) identifying ATM virtual channels.
In most cases the values are provided by the Service Provider.
Accepted VPI: a number between 0 and 15
Accepted VCI: a number between 0 and 511. REQUIRED
type The Connection Service supported by the destination.
Choose between:
•
any:
All Packet Services
•
ethoa:
Bridged Ethernet, Routed Ethernet, Bridged PPPoE and
Routed PPPoE
•
pppoa:
Routed PPPoA and Relayed PPPoA
•
ipoa:
Classical IPoA and Routed IPoA.
REQUIRED